API Std 650 partially anchored liquid-storage tanks with flat bottoms

In line with the service concept of "honesty first, customer first" and the service tenet of "all for customer satisfaction", the company adopts the acceptance and response mode of combining manual and automatic, and accepts the diversified service demands of customer business consultation, complaint declaration, business acceptance, etc. through telephone, fax, e-mail, visit, letter, etc.The API 620 large storage tank nozzle neck is fabricated by welding from 1/2-in. plate. The materials in the tank wall, the nozzle neck, and the reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank wall are fully radiographed, double-welded butt joints. The longitudinal joint in the nozzle neck is of the same type API Std 650 partially anchored liquid-storage tanks but is not radiographed; however, the longitudinal joint and all other parts of the nozzle-and-wall-plate assembly have been shop stress relieved after fabrication, as required by 5.25. The adequacy of the reinforcement and attachment welds shown in Figure F-6 shall be determined.The welded API 650 tank in various sizes and capacities for internal pressures approximating atmospheric pressure (internal pressures not exceeding the weight of the roof plates), but a higher internal pressure API Std 650 partially anchored liquid-storage tanks is permitted when additional requirements are met.Based on the principle of “sincerity and win-win cooperation”, our company keeps forging ahead. In the fierce market competition, we have won the trust and rapid development of our customers with good cooperation and sincere service spirit. With pioneering spirit, the pursuit of excellence, continuous learning, and never satisfied content, we will create a win-win situation with our customers to create a better future. The company has sufficient inventory and complete varieties and specifications.Safety comparison between mechanical cleaning and manual cleaning of vertical storage tank, API Std 650 partially anchored liquid-storage tanks. Closed cleaning is adopted for mechanical cleaning. During the cleaning process, operators are not required to enter the tank. The inert gas space formed in the storage tank can prevent the occurrence of fire, explosion and other accidents. When the API Std 650 partially anchored liquid-storage tanks is manually cleaned, the operators should directly enter the tank for cleaning, threatening the health of employees, and there is no inert gas space in the tank, which is prone to fire and explosion accidents.