API Std 650 open-top tanks flush-stacked on the inside

The calculated thickness of the above-mentioned wall panels required by the hydrostatic pressure is also It API Std 650 open-top tanks should be increased by the same ratio, unless special analysis is performed to determine the seismic overturning moment and the corresponding stress at the bottom of the wall of each layer of API 650 tank.

The API Std 650 open-top tanks must go through strict inspection before putting into use. Inspection of plate groove of API Std 650 open-top tanks, vertical oil tank: After finishing the groove processing of oil tank plate, it is necessary to conduct dye penetrant inspection on the groove. This process is mainly aimed at the hard damage of groove in the machining process and the defects of the plate itself. If any defect is found, it shall be processed again until the defect disappears.

A cylindrical nozzle with a 12-in. inside diameter is located in solid plate in the sidewall of a cylindrical storage tank 60 ft in diameter so that its axis lies in a horizontal plane and forms an angle of 55° with a perpendicular to the sidewall at the point of intersection, as shown in Figure F-7. The thickness of the API Std 650 open-top tanks sidewall plate, tw, in this area is 5/8 in., and no corrosion allowance is required. The total internal pressure, Pl + Pg, at the center of the opening is 26.1 lbf/in.2 gauge.

Every customer who has visit us and witness the steel materials before delievry will be impressed by our quality control departemnt. Even not come to inspect the steel materials before delievry, our quality control departemnt will also send inspection report to the customer. For each order, no matter its quantity and value, our quality control departemnt will make strict inspection before delivery, the inspection contents include apperance, tolerance, dimension, mark, special requirements of customers, etc. To guarantee our steel materials sent to the customer is qualified.

The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.