API Std 650 liquid storage tanks anchor bolts

Structural shapes of 9% and 5% nickel steel may be furnished to the chemical and physical requirements of ASTM A353, A553, or A645. Physical tests shall be in accordance with the requirements of ASTM A6.
API Std 650 liquid storage tanks used Piping, Tubing, and Forgings
Material used for piping, tubing, and forgings shall be compatible in welding strength, and thermal expansion coefficient with the tank shell material. In addition to the specific requirements of this appendix, all piping within the limitations of 1.3.2 shall fulfill the minimum requirements of ASME B31.3.Fabricated to API standard 650 Welded Tanks for Oil Storage Shop Assembled API Std 650 liquid storage tanks Storage Tanks, these tanks are commonly used at oil and natural gas terminals, API Std 650 liquid storage tanks processing plants, and midstream facilities located along pipelines at the pumping, compression, or metering stations. API 650 storage tanks are designed and fabricated considering operating pressures up to 2.5 PSIG, corrosion allowance, wind loading, and seismicity.In 2015, we participated in an tender for oil and casing pipe in Pakistan. Because of our professional service and company strength. The end user chose us as the final contractor of the project of 22000 meters pipes of different sizes production. It takes us about 3 months to produce all the pipes API Std 650 liquid storage tanks . We use bulk vessel to ship the pipe to Karachi port. Our engineers went to Karachi port to inspect the condition along with the customer when ship arrive. The customer gave high appraise to the pipe quality and our serviceBefore welding the API Std 650 liquid storage tanks, the professional skills of the welding personnel shall be fully assessed to ensure that the operators meet the corresponding welding qualifications. According to the technical standards, scientific and feasible process requirements are actually formulated. In the process of welding the edge plate of API Std 650 liquid storage tanks, electric welding is required on one side of the edge plate, so that the edge plate has a free shrinkage effect and greatly reduces the residual stress of the welding seam.The results of adopting two-level API Std 650 liquid storage tanks service system and implementing standardized management are mainly reflected in the formation of vigorous work style such as quick response and quick action. Our company's customer service center stipulates that employees must be accurate and quick in technical support and API Std 650 liquid storage tanks after-sales service. Through the formation of this fast, agile, vigorous style, to provide users with satisfactory service.