API Std 650 ground supported liquid storage tanks roof venting
Surface Inspection of low-pressure storage tank Component PartsBefore assembly, unless already so certified by shop inspectors, all sidewall plates or sections and roof and bottom plates shall be inspected for thickness, freedom from injurious defects, and soundness of any welded joints.Check of Dimensions of API Std 650 ground supported liquid storage tanks Component PartsAll formed plates and curved sections shall be checked for conformance with the planned dimensions and cross section. For unusual repairs the inspector should keep a record of measurements taken at sufficient intervals to constitute a satisfactory record.Check of Chemical and Physical Property DataThe inspector shall check the material being assembled by the lists of the plates from the mill, their heat numbers, chemical analyses, and mechanical properties as given on mill reports and shall see that copies are available to be attached to the Manufacturer’s report.
Under the action of the earthquake, API 650 storage tank is mainly damaged by the phenomenon of the lower part of the API Std 650 ground supported liquid storage tanks tank wall. Therefore, the key point of seismic calculation is to prevent the tank wall from buckling under axial pressure.
The Egypt customer ordered 130 tons API Std 650 ground supported liquid storage tanks stainless steel plate in stock, and this batch has left port today for its destination today(October 25th, 2019). 316l stainless steel is molybdenum-bearing austenitic stainless steel. This material has better corrosion resistant property than 304/314L for it's higher Ni and Mo content. (it is considered to be marine grade stainless steel, not suitable for warm sea water treatment). 316L austenitic stainless steel supplied by our company has good formability and weldablity, additionally it is proved to have excellent properties of tensile, creep and stress-rupture strengths in elevated temperature environment.
}The main content of the inspection of the safety management of metal atmospheric API Std 650 ground supported liquid storage tanks is whether the filed data of the storage tanks are complete; whether the operators have received safety management training; whether the problems detected in the past have been resolved. The main inspection content of the tank body of the metal atmospheric pressure storage tank is whether the tank top, tank wall, and bottom plate of the storage tank are deformed, dented, seepage and perforation, etc.; whether the API Std 650 ground supported liquid storage tanks accessories are complete and whether there are any abnormalities; No sinking, tilting, etc.
If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.
