API Std 650 aluminum tanks bleeder vents

Welding certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For both API Std 650 aluminum tanks storage tank API 650, non-destructive inspection is required, but third-party inspection is not required.

Charpy V-notch specimens shall be taken from the weld metal and from the heat-affected zone of the welding procedure qualification test plates or from duplicate test plates.
Weld metal impact specimens shall be taken across the weld with the notch in the API 620 oil tank material weld metal. The specimen shall be oriented so that the notch is normal to the surface of the material. One face of the specimen shall be substantially parallel to and within 1/16 in. of the surface.

Every after-sales service shall have a detailed record of the customer's product problems and handling methods. The records shall be sorted into volumes and filed on a monthly basis, and submitted to the technical department for filing. The problems found in the after-sales service shall be summarized in a timely manner, discussed with the technical department, the quality inspection department and the production department, and a proper solution shall be proposed for the technical department to improve in a timely manner;