API Std 650 aboveground steel oil storage tanks structural member thickness

Compared with the external floating roof API Std 650 aboveground steel oil storage tanks, the internal floating roof API Std 650 aboveground steel oil storage tanks has the advantages of protecting the floating roof from wind and rain and ensuring the quality of liquid storage under the floating roof. At the same time, because the inner floating plate is in the tank, there is no rain and snow load, so the central drainage pipe and escalator and other accessories on the floating plate can be omitted. In addition, under the same sealing conditions, the internal floating roof tank can further reduce the evaporation loss compared with the External floating roof tank.

The company formulates clear service process and service standard. To do a good job in after-sales service, first of all, clear service process and service standards should be formulated to let employees know which procedures to perform and which service standards to abide by.

In cylindrical tank walls, the longitudinal weld joints in adjacent shell courses, including compression ring welds, shall be offset from each other a minimum distance of 12 in. The butt-weld around the periphery of a thickened insert plate, or the fillet weld around the periphery of a reinforcing plate, shall be at least the greater of 10 times the shell thickness or 12 in. from any butt-welded seam or the bottom-to-shell or roof-to-shell joint. As an alternative, the insert plate (or the API Std 650 aboveground steel oil storage tanks reinforcing plate in an assembly that does not require stress relief) may extend to and intersect a flat-bottom-to-shell corner joint at approximately 90 degrees.

The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API Std 650 aboveground steel oil storage tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.