API standard 650 SUG III tanks for small internal pressures

Design of Compression-ring Regions
In this project, a cylindrical tank 30 ft in diameter is designed for an internal pressure of 5 lbf/in.2 gauge in the vapor space. The plate material is ASTM A131 Grade A steel for thicknesses of 1/2 in. and less. The top course of the butt- welded cylindrical sidewall is 1/4 in. thick, including a 1/16 in. corrosion allowance. The tank API standard 650 SUG III tanks roof is a butt-welded spherical dome with an internal radius of 30 ft and a thickness of 1/4 in., including a 1/16 in. corrosion allowance. The maximum design liquid level is 6 in. below the plane of the juncture of the roof and sidewall.

The outer layer of API 650 tank is glass fiber reinforced plastic layer with a thickness of more than 2.5mm, which API standard 650 SUG III tanks has strong corrosion resistance and electric corrosion resistance. Special process technology is used between the two layers to make the gap reach 0.1 mm, so as to eliminate the existence of potential safety hazard from the root.

This customer is a leading Engineering, Procurement and Construction company serving the Hydrocarbon and Chemical industries spanning Oil & Gas, Petrochemical, Refining, Fertilizer and related sectors in India. The A335 Grade P5 Steel Pipe and P9 API standard 650 SUG III tanks Seamless Steel Pipe we supplied is for EIL refineries project.

Oil storage tank with floating roof structure: The floating roof in the API standard 650 SUG III tanks oil storage tank can effectively reduce the volatilization consumption of oil, because the gas space on the oil liquid surface in the floating roof storage tank is small, the exhaust volume is low, and the breathing loss is very small. That can reduce the volatilization loss caused by the "big breath" of the API standard 650 SUG III tanks. Strengthen the inspection and maintenance of API standard 650 SUG III tanks: regularly check the sealing conditions of oil storage tanks, and check and maintain important auxiliary equipment to ensure good sealing performance.

The company conducts periodic and targeted training and guidance for after-sales service personnel. As the saying goes, "no one is perfect, no gold is red", to help after-sales service personnel improve service skills and correct service attitude. Carry out relevant technical training for after-sales service personnel, so that after-sales service practitioners have professional product knowledge.