API standard 650 SUG II tanks depth of fusion
The characteristics of the API standard 650 SUG II tanks internal floating roof structure of API 650 petroleum storage tanks: the inner floating roof or inner floating plate refers to the floating roof that floats on the liquid surface of the oil tank with the oil and liquid up and down. The API standard 650 SUG II tanks inner floating roof is used to cover the liquid. The surface is currently recognized as the most ideal and most economical and practical way to reduce oil evaporation loss.
The opening pressure or vacuum of the pressure relief and API standard 650 SUG II tanks vacuum relief valves shall be checked by pumping air above the water level and releasing the pressure and then partially withdrawing water from the tank. After the tank has been emptied of water and is at atmospheric pressure, the anchorage, if provided, shall be rechecked for tightness against the hold-down brackets. Air pressure, equal to the design pressure, shall be applied to the empty tank, and the anchorage, if provided, and the foundation shall be checked for uplift.
During the use of API standard 650 SUG II tanks, the tank material is prone to crack and leakage under the action of pressure, corrosion, wear and other conditions. Especially in the oil producing area, the temperature difference in four seasons is large and the natural environment is bad, which will accelerate the consumption of oil storage tank and cause many potential safety hazards. Therefore, the API standard 650 SUG II tanks must undergo strict inspections before being put into use after the production and installation are completed, so as to avoid cracks and leakage in short-term use and affect production safety.
The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.
Our company doesn't need the cheapest quotation to choose international logistics company, but the price performance ratio will be high, the service will be good, and the transportation must be safe and punctual, which will not affect the time when the API standard 650 SUG II tanks goods arrive at the destination, and the logistics situation will be well communicated with customers in advance. Therefore, when we choose international logistics companies, we will have a look at their timeliness and service attitude in advance. It is only important to transport goods according to the requirements of customers for logistics.
Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.
