API standard 650 SUG II tanks data sheets

The interior of API 650 storage tanks to be internally lined or coated must have all edges rounded to a minimum of 3 mm radius. Internal welds must be completely seal welded, ground smooth, and free from API standard 650 SUG II tanks surface porosity, pockets, and high spots. Remove weld spatter. Vendor as specified on API 650 storage tanks drawing must perform additional surface preparation.

Requirements for prefabrication of the top of large vertical API standard 650 SUG II tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

The design metal temperature of API standard 650 SUG II tanks each component exposed to the liquid or vapor being stored shall be the lower of the following:
a)The minimum temperature to which the tank contents will be refrigerated, including the effect of subcooling at reduced pressure.
b)The minimum metal temperature anticipated when the atmospheric temperature is below the refrigerated temperature (see 4.2.1). The effectiveness of the insulation in keeping the metal temperature above the expected minimum atmospheric temperature shall be considered.

Our company's technical department is the core department of the whole company. There are a group of very professional technical personnel. They provide some architectural drawings according to the ideas of customers, and they are responsible for how to select the right materials. Including the evaluation of steel products such as multi steel plate, API standard 650 SUG II tanks and steel pipe, grasp the whole production process, and strictly follow the production standards and customer quality requirements.

We have efficient and quick logistic team service. We promise that after the customer places the order, the spot products will be shipped, processed, and cut on the same day. The steel API standard 650 SUG II tanks products will be shipped in 2-5 days according to the characteristics of the product. The company has always been adhering to the service concept of "integrity, pragmatism, enthusiasm" and dedicated to providing our customers with high-quality steel products and after-sales service.