API standard 650 storage tanks manual welding
All edges of the inner wall of the API 650 petroleum storage tank to be lined or coated must be rounded and flat to a minimum radius of 3mm. The API standard 650 storage tanks internal welding seam must be completely sealed welding, with a smooth surface and no air holes, air pockets and local protrusions. Remove welding spatter. As specified in API 650 petroleum storage tank design drawings, the seller must perform additional surface treatment.
Pressure Setting of Safety DevicesExcept as provided in API 620 tank 9.5 for certain liquid relief valves, the pressure setting of a pressure-relieving device shall in no case exceed the maximum pressure that can exist at the level where the device is located when the pressure at the top of the tank equals the nominal pressure rating for the tank (see API 620 tank 5.3.1) and the liquid contained in the tank API standard 650 storage tanks is at the maximum design level.Vacuum-relieving devices shall be set to open at such a pressure or partial vacuum that the partial vacuum in the tank cannot exceed that for which the tank is designed when the inflow of air (or other gas or vapor) through the device is at its maximum specified rate.
The normal operation of API standard 650 storage tanks includes receiving oil, storing oil, sending oil and measuring oil. The correct use and operation of oil storage tank is directly related to the production safety and oil loss of oil tank. In order to use and operate the API standard 650 storage tanks correctly, it is necessary to be familiar with and master the structure and performance of the API standard 650 storage tanks and its accessories, such as the maximum storage capacity of the oil tank, the pressure range that can bear and the safety fabrication specification.
Training is one of the important factors in the construction of corporate culture. Online training system can be used to enable all employees to take advantage of fragmented time and carry out targeted training anytime and anywhere without the limitation of time and region. Through training to improve work skills, at the same time, through training, let all improve their quality education level, let employees work around a goal, create a career, and produce results.
The company's headquarters has a well-established logistics distribution system, which can quickly transport the steel materials to the port through the contracted logistics companies. Professional contracted logistics companies can significantly reduce costs and various commodity-related expenses. Meanwhile, the flexible transfer ensures that the API standard 650 storage tanks steel materials can be shipped immediately after passing the quality inspection.
Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.
