API standard 650 storage tank roof drains

When the API standard 650 storage tank top shell course is the minimum thickness indicated in 5.10.4, Table 5-6 and Figure 5-6, details a – e, h and i, the minimum anchorage shall be designed for normal loads as specified by the Purchaser and by this standard. See 5.11.2.3 for the allowable stress. When the top shell course is thickened beyond the minimum thickness provided in Table 5-6 or as in Figure 5-6, details f and g, or a knuckle is used, the minimum anchorage shall be designed for three times the internal design pressure. The allowable stress for this loading is 90% of the minimum specified yield strength of anchorage material.

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API standard 650 storage tank hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

FANALCA is the biggest motorcycle factory in Columbia. Meanwhile, it is the only distributor in Colombia for Japanese Honda. We began to cooperate with each other since 2017. We supply SAPH370, SAPH440 and so on automobile steel coils to them. As our products quality is proved to be satisfied during their production, they have been one of our stable customers, and give repeat orders about automobile steel every year.

The heat transfer oil fin tube heating device for large API standard 650 storage tank heats the circulating heat transfer oil in the shell and tube heat exchanger through high temperature and high pressure steam. The heat transfer oil exchanges heat with the medium to be heated in the storage tank through the heating coil, so as to heat the storage medium. High temperature heat transfer oil fin tube heating device has the following advantages:
1. High heat transfer efficiency
2. Reduce heating coil leakage
3. Easy to repair and maintain

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.