API standard 650 stainless steel storage tanks CSA specifications plates

The impression of most customers who have cooperated with us on the company is being professional and responsible. That mainly owe to our united and considerate team members. For example, the professional technician, the responsible QC inspector, the experienced sales person, the rigorous document maker, the patient after-sales, etc. Their selfless devotion bring the customer good experience, and bring the company good reputation.Suggested Practice Regarding Installation of Low-pressure storage tanks
Access: All openings and accessories for tanks API standard 650 stainless steel storage tanks constructed according to this standard shall be installed so that any periodic inspections required can be readily made.
Corrosion: When a tank bottom rests directly on the ground, a survey shall be made to establish the need for cathodic protection.
Drainage: All tanks in which water might accumulate under the hydrocarbon contents shall be provided with adequate drains that are suitably protected from freezing.The vent pipe mouth should be 4m or more above the ground. The nominal diameter of the API standard 650 stainless steel storage tanks API 650 petroleum storage tank vent pipe should be no less than 50mm and a flame arrestor should be installed.We had a wonderful trip in Phuket Island, Thailand. At the end of 2019, in order to thank employees for their hard work for a year and enrich their lives, our company organized a pleasant trip to Phuket Island, Thailand. The tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5 o'clock in the afternoon on the 22th December.Operation points of sand blasting rust removal for metal storage tank, API standard 650 stainless steel storage tanks:
1. The equipment should be as close as possible to the workpiece to be processed, so as to reduce the pipeline length and pressure loss, avoid excessive pipeline wear, and facilitate the construction personnel to contact each other.
2. The jet pipe should be straight as much as possible to reduce the concentrated wear at the bend. The wear direction of the bend should be changed frequently to prolong the service life of the pipe.
3. Strictly control the process parameters.