API standard 650 special tank seismic use group iii
The elastic filling and sealing of floating roof API standard 650 special tank is to fill the elastic and changeable objects in the sealed envelope, and the sealing purpose depends on the compression deformation of the filler. This kind of sealing effect is good, the requirement of the geometry of tank wall is not too high, and the adaptability is strong. However, the elastic filling and sealing has poor wear resistance and is easy to deform and damage in long-term use.
Our company will accept the product quality objection registration record, pass it to the API standard 650 special tank production unit and relevant departments, and timely coordinate the supervision of product API standard 650 special tank quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.
API standard 650 special tank Pressure-relieving DevicesTanks shall be protected by automatic pressure-relieving devices that will prevent the pressure at the top of the tank from rising more than 10% above the maximum positive gauge pressure except as provided in API 620 standard 9.2.2.Where an additional hazard can be created by the exposure of the tank to accidental fire or another unexpected source of heat external to the tank, supplemental pressure-relieving devices shall be installed. These devices shall be capable of preventing the pressure from rising more than 20% above the maximum positive gauge pressure. A single pressure-relieving valve may be used if it satisfies the requirements of this paragraph and 9.2.1.
storage tanks API standard 650 special tank built to these standards are spread across U.S. refineries, terminals, pipelines, and production facilities. The API 650 petroleum storage tank detailed standard specifies the design, processing, welding, inspection and installation procedures of the storage tank.