API standard 650 self-anchored tank nominal thickness

After comprehensive and professional training such as customer service, the customer service team has more strict discipline in the management of customer service team to ensure that customer service personnel respond to customers with a professional attitude. A process supervision system has been set up to let each customer supervise the process of the system with usLarge Low-Pressure Tanks Corrosion Allowance
In cases in which the rate of corrosion is closely predictable, additional metal thickness over and above that required for the initial operating conditions shall be provided and shall be at least equal to the expected corrosion loss during the desired life of the tank.
When corrosion effects are indeterminate before the tank is designed (although they are known to be inherent to some degree in the service for which the tank is to be used), and when corrosion is incidental, localized, or variable in rate and extent, the best judgement of the API standard 650 self-anchored tank designer must be exercised in establishing reasonable maximum excess tank wall thicknesses. For all tanks that come under this classification, a minimum corrosion allowance of 1/16 in. shall be provided.We also specialize in internal and external floating roofs, cathodic protection, primary and secondary containment, and storage tank foundations. Our staff are skilled in producing API 650 petroleum storage tanks. If you need to replace or repair API standard 650 self-anchored tank API 650 petroleum storage tanks, please contact us in time. Every API 650 petroleum storage tank we make emphasizes quality and safety.we develop very well through those years even the external environment is not conducive to the whole steel industry. With the prosperity of our group, our company always bear its staff who contributes to its growth in mind, and always on the way to improve welfare and treatment. That makes us staff and work with pleasure. On the other way, they creat a better and stronger our group. That may be one of the key factors why we develop so rapidly those years. Here we can say proudly “we are family”.Crack treatment of API standard 650 self-anchored tank weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.