API standard 650 self-anchored storage tanks designers

The thickness of the API standard 650 self-anchored storage tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 0.57 in. The nozzle neck is seamless steel pipe and conforms to ASTM A53, Grade A; the materials in the tank wall and reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank walls are fully radiographed, double-welded butt joints. The adequacy of the reinforcement and attachment welds shown in Figure F-7 shall be determined.
To determine the length of the nozzle neck within the limits of reinforcement, the smaller of the following calculated values shall be used:(2.5)(0.625) = 1.56 in.
(2.5)(0.375) + 0.75 = 1.69 in.

While GB50341 generally takes the weld coefficient as 0.9;When the minimum yield strength of API standard 650 self-anchored storage tanks steel plate is greater than 390 MPa, take 0.85. The thickness of API 650 tanks is generally smaller than that of GB50341, and this difference is particularly evident in the design of large tanks, where the overall weight of the tanks varies greatly.

Shipping 1000MT low alloy steel plate and cutting sectors to Mexico in 2014. Andritz is One Of Biggest company In globe world. Our company Win The Tender With Lauca project In Mexico To Offer 1000MT Steel Plate API standard 650 self-anchored storage tanks to them.The Steel plate need to do cutting according the drawing by standard tolerance,UT,MT and dimension request.After Get Customer Contract, Steel Plate Are Produced within 40 days .Then, Goods Trucked To Shanghai Loading Port Soon And Shipping In Time To Statisfy With Project Expected After Finished Producing. The Steel Quality Had Been Get Customers’Praise."

The main contents of safety inspection for atmospheric storage tank, API standard 650 self-anchored storage tanks are to see whether the tank foundation is sunk, whether the tank is corroded, whether there are cracks in the tank body and bottom, whether there is concave convex phenomenon on the top and wall of the tank, whether the accessories of the storage tank are in good condition, etc. After the API standard 650 self-anchored storage tanks safety inspection and detection, the defects found in the tank should be handled according to the inspection rules in time to ensure the normal and safe use of the storage tank in the later stage.

Both parties shall confirm the API standard 650 self-anchored storage tanks material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the API standard 650 self-anchored storage tanks steel plant.