API standard 650 flat-bottom oil storage tanks examination of welds

All edges of the inner wall of the API 650 petroleum storage tank to be lined or coated must be rounded and flat to a minimum radius of 3mm. The API standard 650 flat-bottom oil storage tanks internal welding seam must be completely sealed welding, with a smooth surface and no air holes, air pockets and local protrusions. Remove welding spatter. As specified in API 650 petroleum storage tank design drawings, the seller must perform additional surface treatment.

After using for a certain period of time, it is necessary to check the corrosion protection of the metal oil tank and paint the outer wall of the API standard 650 flat-bottom oil storage tanks with anti-corrosion paint. The inlet and outlet valves of API standard 650 flat-bottom oil storage tanks shall be inspected and maintained regularly to ensure they are in good condition. Oil tank will produce a lot of dirt when it is stored for a long time. Usually, the cleaning cycle of metal oil tank is about three to five years.

The API 620 large storage tank nozzle neck is fabricated by welding from 1/2-in. plate. The materials in the tank wall, the nozzle neck, and the reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank wall are fully radiographed, double-welded butt joints. The longitudinal joint in the nozzle neck is of the same type API standard 650 flat-bottom oil storage tanks but is not radiographed; however, the longitudinal joint and all other parts of the nozzle-and-wall-plate assembly have been shop stress relieved after fabrication, as required by 5.25. The adequacy of the reinforcement and attachment welds shown in Figure F-6 shall be determined.

In the final analysis, the market competition is the competition for customers. Whether selling products or services, the final customer satisfaction is the standard to test the success or failure of marketing work. The so-called after-sales service is to fully understand customers, study customer psychology, pay attention to after-sales details, improve work shortcomings, improve service quality, and Exchange customer brand loyalty through the whole process of quality service.

Our company doesn't need the cheapest quotation to choose international logistics company, but the price performance ratio will be high, the service will be good, and the transportation must be safe and punctual, which will not affect the time when the API standard 650 flat-bottom oil storage tanks goods arrive at the destination, and the logistics situation will be well communicated with customers in advance. Therefore, when we choose international logistics companies, we will have a look at their timeliness and service attitude in advance. It is only important to transport goods according to the requirements of customers for logistics.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!