API standard 650 flat-bottom oil storage tanks drawings

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API standard 650 flat-bottom oil storage tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

Upon completion of API standard 650 flat-bottom oil storage tanks construction, provide Purchase with a Vendor's Certification that the tank conforms to the requirements of API 650 and to the additional requirements as specified.

We exported 352 tons SA387GR12CL2 steel plates to Vietnam. The Vietnam customer needed the SA387GR12CL2 steel plates for their tank fabrication project urgently. We are world class steel materials supplier and exporter. Other than regular fresh production, we also keep huge stocks, so as to meet urgent demands of our customers. For the 352 tons SA387GR12CL2 steel API standard 650 flat-bottom oil storage tanks plates, we collected from our warehouse and it only took us 3 days to arrange delivery. The customer was really impressed by our rapid shipping and spoke highly of our SA387GR12CL2 steel plates quality after use.

Atmospheric API standard 650 flat-bottom oil storage tanks refer to storage tanks whose gas or vapor pressure is greater than -0.02MPa but less than 0.1MPa. Metal atmospheric storage tanks made of steel welded on the ground are often used to store petroleum, chemical and other similar liquids. Atmospheric API standard 650 flat-bottom oil storage tanks usually have a connecting pipe directly connected to the atmosphere, so that the operating pressure in the storage tank does not exceed the design pressure at all times.

When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.