API standard 650 fixed roof tanks flush-stacked on the inside

Pipeline transportation of API 650 oil tank is not less than the maximum consumption of 3 to 5 days. The daily operating time of API standard 650 Fixed roof tanks office buildings and fuel oil equipment is 12-16 hours; for high-end residential hotel buildings, the daily operating time is 16-24 hours.

API standard 650 fixed roof tanks Drain hole: The drain hole is generally installed at the bottom of the oil tank, used to remove sludge when cleaning the oil tank, and usually used to drain the sewage in the tank. API standard 650 fixed roof tanks Safety valve: The role of the safety valve is to play a safety role when the breathing valve fails during the operation of the oil tank. Its working pressure is slightly higher than the pressure of the breathing valve, which can prevent the tank from being damaged due to the high positive or negative pressure in the tank. The safety valve is usually installed in the middle of the API standard 650 fixed roof tanks top.

The API standard 650 fixed roof tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

BEBON is a large steel group with finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. We are committed to creating a various culture system with its own characteristics, and work hard to create a first-class steel plate company in China. Based on the business philosophy of quality-oriented and strengthened management, the company continues to develop in this industry.

The trend of international shipping development of large-scale ships and strategic joint ventures puts forward higher requirements for modern ports. Modern ports no longer use the general cargo throughput as a measure sign, and container throughput will become the main sign to measure the role and status of modern ports. The average container capacity in 2000 is 3200teu, and it is expected to be 5500teu in 2020.