API standard 650 duplex stainless steel tanks subject to a small internal pressure

BBN employees work hard and work hard in their work. In life, colleagues care about each other, like a family, and accompany each other at important moments in life. BBN Steel organizes employees to carry out tourism activities every year, so that families can be exposed to nature and relax physically and mentally. The good combination of working and rest can achieve the goal of hard work and happy life.Preheat Treatment
Many laboratory tests have shown preheat treatment of carbon steel to 300°F-400°F to be the equivalent of the post-heat treatment at no less than 1100°F insofar as the physical properties of the weldment are concerned.40,41 Some tests have indicated a slight advantage of the post-heat treatment. Most of the tests have been made on plates 3/4 in. - 1 in. thick; results must be viewed with caution if preheating is applied appreciably beyond this thickness range. However, for all practical purposes, improvement resulting from preheating is sufficiently well established so that preheat should be considered for field fabrication of API 620 crude oil tank plates over 3/4-in. thick whenever toughness of the tank API standard 650 duplex stainless steel tanks is highly desired and the thermal post-heat treatment is impractical.The API 650 tank Standard has the built in flexibility to be used in building tanks to store a wide variety of products while ensuring the structural stability of the API standard 650 duplex stainless steel tanks tank.Integrity, cooperation and innovation, positive and competitive, healthy and abundant are the company's core values. The company API standard 650 duplex stainless steel tanks always adhere to the "people-oriented", pay attention to improve the production skills and cultural quality of employees, by cultivating employees to carry forward excellent cultural traditions, set up the correct values, ethics and codes of conduct to improve employees' loyalty and work enthusiasm.Welders participating in the construction of API standard 650 duplex stainless steel tanks must pass the examination and perform welding within the validity period of the qualified items. Special operators such as on-site maintenance electricians, cranes, and shelf workers must hold job certificates. All oil pipelines need to use arc welding for bottoming and electric welding to ensure the welding quality. Oil tanks and process pipelines must be tested for non-destructive flaws in accordance with the flaw detection ratios and methods required by the design and acceptance specifications. The flaw detectors must be certified.