API standard 650 carbon steel storage tanks roof plates
In this project, a cylindrical tank 62 ft 6 in. in diameter is designed for an internal pressure of 4 lbf/in.2 gauge in the vapor space. The plate material is ASTM A131 steel with appropriate grades for different plate thicknesses in accordance with Table 4-1 for a design metal temperature less than 65°F but not less than 25°F. No corrosion allowance is required for any portion of the tank. The top course of the butt-welded cylindrical sidewall is 1/4 in. thick. The roof is a single lap-welded spherical dome with an internal radius of 50 ft and a thickness of 1/4 in. The maximum design liquid level is 6 in. below the plane of the juncture of the tank API standard 650 carbon steel storage tanks roof and sidewall.
BBN excels in the design, fabrication and erection of API-650 tanks. API (American Petroleum Institute) has created a set of standards for above ground API standard 650 carbon steel storage tanks oil storage, but these tanks are also commonly used for gasoline, chemical and water storage. API-650 storage tank solutions range in size from an 8’ -0” diameter shop fabricated tank up to and beyond 100’ -0” diameter field erected storage tank applications.
The Philiphine customer is our old customer, and they are engaged in offshore oilfield resources drilling projects. Thus they have regular steel demands. They ordered 1008 tons API 5L grade B ERW pipes and Q345B seamless pipes from us in April 2018. And told us that is a regular demand almost every two month. Since our first success cooperation, we have cooperated with each other regularly. And they also bring us new opportunities and signification in Philippians market.
}API standard 650 carbon steel storage tanks Breathing valve: The function of the oil tank breathing valve is to adjust the oil and gas pressure in the tank. When the pressure in the tank is too high, part of the excess oil and gas will be discharged through the breathing valve to reduce the pressure in the tank; when the pressure in the tank is too low, through breathing The valve sucks in air from the outside of the tank to increase the pressure in the tank and keep it constant with the atmospheric pressure. The breathing valve is usually installed at the top of the oil tank.
The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.
