API standard 650 carbon steel storage tanks compartments
Application scope of API 650 petroleum storage tank:1. API standard 650 carbon steel storage tanks Working pressure: atmospheric storage tank;2. API 650 petroleum storage tank working temperature: -30℃~150℃;3. API 650 petroleum storage tank liquid medium: various oil products, including naphtha, gasoline, diesel, kerosene, crude oil, fuel oil, heavy oil, benzene, xylene, methanol, ethanol;4. API 650 petroleum storage tank volume: current design considerations generally do not exceed 10,000 cubic meters.
The API standard 650 carbon steel storage tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.
There is no dome roof in the top of the vertical external floating roof oil storage tank, only the disc floating roof which can float up and down. The wall plates are connected by butt welding, and the construction is usually carried out by the forward installation method, and the storage capacity is usually more than 10000 cubic meters. Vertical internal floating roof API standard 650 carbon steel storage tanks has both dome roof and internal floating roof. The internal floating roof floats on the liquid surface inside the dome roof oil tank and can float up and down. The storage capacity is usually between 1000 and 10000 cubic meters.
Aspire to technological innovation and pursue first-class quality steel API standard 650 carbon steel storage tanks products.Take independent innovation as an important support for the sustainable development of iron and steel industry, strengthen the main position of technological innovation, accelerate the original innovation, integrated innovation, introduction, digestion, absorption and re innovation, improve the technological innovation system, and cultivate the core technology and brand products of independent intellectual property rights.
In particular, the EU imports a large amount of iron ore from central and South America and Oceania, which are mainly transported by sea. The perfect port infrastructure makes the port operation cost of EU iron ore raw materials import relatively low. However, the API standard 650 carbon steel storage tanks steel transportation between EU Member States is mainly railway transportation, and the EU member states have established a very developed railway network and railway information infrastructure.
To provide customers with the most satisfactory service and realize the win-win of economic and social benefits, our company promises to provide excellent API standard 650 carbon steel storage tanks products in this bidding, and in line with the attitude of being serious and responsible to customers, before sending goods to users, the API standard 650 carbon steel storage tanks technical personnel shall confirm that there is no fault in the equipment before sending goods to users, and then send goods and products to users, and formulate the following service terms.