API standard 650 ambient temperature tanks landing legs

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.Impact Tests for High Alloys
Impact tests are not required for the high-alloy (austenitic stainless steel) API standard 650 ambient temperature tanks base materials, nickel alloy based materials, aluminum base materials, and weld deposited for the nonferrous (aluminum) materials. Impact tests are not required for austenitic stainless steel welds deposited by all the welding processes for services of –200°F and above. Austenitic stainless steel welds deposited for service below –200°F by all welding processes shall be impact tested in accordance with Q.6.2 except that the required impact values shall be 75% of the values as given in Q.2.2.2, Item c.For open top and fixed roof API 650 tanks, the net working capacity is the liquid volume contained between the minimum operating level (top of API 650 tanks API standard 650 ambient temperature tanks outlet connection) and the maximum operating level [limited to the bottom of overflow connection, 75 mm below foam chamber connection, or 150 mm below rim, whichever is greater.Strengthen system construction. The system itself has a certain binding force, which specifies the rights and obligations of employees. It is a passive management means for employees. Its purpose is to promote each employee to develop good professional habits, form good behavior norms, and promote the improvement of enterprise management level.The structure of the API standard 650 ambient temperature tanks foundation mainly includes the insulating anticorrosion layer on the top surface of the foundation, the tank wall support, the edge retaining structure, the sand cushion, the oil and water barrier, the detection signal tube and other structures. The construction materials and requirements of each basic structure of the storage tank are different. After the structure of the API standard 650 ambient temperature tanks foundation is built in accordance with the construction requirements, the settlement of the storage tank foundation needs to be observed, and the uneven settlement value of the storage tank foundation should be within the allowable safety range.