API standard 650 aboveground welded storage tanks bottom annular-plate joints

When welding API standard 650 aboveground welded storage tanks, in order to avoid weld deformation, it is necessary to use corresponding welding process according to the type of steel used in the tank, such as welding requirements of steel plate, welding position, etc. Reasonable arrangement of the assembly sequence, the use of subsection back welding and jump welding method, strict control of welding process parameters, rigid fixation measures, take corrective measures for deformation compensation are necessary.

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API standard 650 aboveground welded storage tanks stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

The characteristics of the API standard 650 aboveground welded storage tanks internal floating roof structure of API 650 petroleum storage tanks: the inner floating roof or inner floating plate refers to the floating roof that floats on the liquid surface of the oil tank with the oil and liquid up and down. The API standard 650 aboveground welded storage tanks inner floating roof is used to cover the liquid. The surface is currently recognized as the most ideal and most economical and practical way to reduce oil evaporation loss.

The 2019 Year of the Pig is the 70th anniversary of the founding of the People's Republic of China. Growing up with the motherland, our company sang songs to the mark the 70th victory anniversary. In September, we organized all employees to sing "My Country and I" and made a film.

The strip steel thickness is generally below 6mm, which is convenient for crimping and processing. You should choose the API standard 650 aboveground welded storage tanks, strip steel specifications according to your own purposes. The specifications and materials used for different purposes are different, so you must confirm it before buying. It is best to ask professionals to give advice before purchasing strip steel, and purchase the specifications and types you need according to the corresponding requirements.