API 650 welded tanks for oil storage liquid-mounted seals

Thickness as it Affects Preheat and Post-heat Requirements
Plate with thicknesses below 1/2 in. is reasonably notch tough. In most steels, when the API 650 welded tanks for oil storage used plate thickness exceeds 3/4 in. – 1 in., notch toughness, particularly as welded, decreases sharply. The decrease in notch toughness can be minimized by the conventional post-heat treatment and, in many steels, by preheat treatment. The benefits of preheat treatment in steels 3/4 in. – 1 in. thick have been demonstrated; similar benefits could be expected in thicker steels, but sufficient experimental data are currently lacking.

Before pressure testing, thoroughly flush the API 650 tank floating roof primary drain hose system. Supply API 650 welded tanks for oil storage blind flanges, gaskets, and bolting (for other types of blanking covers as may be required) necessary for testing.

FANALCA is the biggest motorcycle factory in Columbia. Meanwhile, it is the only distributor in Colombia for Japanese Honda. We began to cooperate with each other since 2017. We supply SAPH370, SAPH440 and so on automobile steel coils to them. As our products quality is proved to be satisfied during their production, they have been one of our stable customers, and give repeat orders about automobile steel every year.

Strictly controlling the temperature in the API 650 welded tanks for oil storage can effectively reduce the volatile consumption of oil in large oil storage tanks. Because the higher the temperature in the oil storage tank, the stronger the activity of oil molecules and the greater the volatilization consumption of the oil. Therefore, the temperature in the API 650 welded tanks for oil storage must be reduced as much as possible. It is possible to reduce the direct sunlight temperature by painting white anticorrosive paint with good light reflectivity. It is also possible to use spray equipment to wash the top and wall of the API 650 welded tanks for oil storage with water flow to reduce the volatilization consumption of the oil in the storage tank.

The company has passed the ISO9001: 2008 quality system certification, strictly implemented the ISO9001 quality management system. Besides, we have continuously improved the after-sales service network to make every effort to provide more convenient, accurate and faster services for all customers. We will supervise the production, control the quality in the factory, Inspect the cargo before shipment, Issue the test report to sales department. From the steel prodcution to steel delivery, we always focus the whole process.