API 650 SUG III tanks bottom shell

Protection of Plates during Shipping and Storage
Plates shall be adequately protected during shipping and storage to avoid damage to API 650 SUG III tanks material plate surfaces and edges from handling (scratches, gouge marks, etc.) and from environmental conditions (corrosion, pitting, etc.).
Plates shall be protected from moisture or stored in inclined position to prevent water from collecting and standing on surface.

BBN can provide design, manufacture and installation of API 650 large oil and crude oil storage tanks. We can build a API 650 SUG III tanks 7,000,000 gallon API 650 petroleum storage tank. In addition, BBN has the means to construct multiple storage tanks at the same time. We are very experienced in providing API 650 petroleum storage tanks.

Tank cracks are common API 650 SUG III tanks defects, mainly including tank wall cracks, internal cracks, weld zone cracks. The reason for these defects may be that the defects not exceeding the standard existed in the early stage of API 650 SUG III tanks construction, which become obvious after the later use. Or in the process of using the API 650 SUG III tanks, the tank body material generated new defects due to corrosion, pressure, wear and other reasons, and tank cracks.