API 650 SUG II tanks coating

API 650 petroleum storage tank has the advantage of long economic life: because there is no gas space on the liquid surface in the internal floating roof API 650 SUG II tanks storage tank, the vibration generated during the transportation of liquid inside and outside the tank is reduced.

In this project a cylindrical tank 75 ft in diameter is designed for an internal pressure of 0.5 lbf/in.2 gauge in the vapor space. The plate material is ASTM A131 Grade B steel for thicknesses of 1/2 in. and less.
The top course of the butt-welded cylindrical sidewall is 1/4 in. thick. The tank API 650 SUG II tanks roof is a conical shape with a 2:12 slope and a 1/4 in. thickness with single full-fillet welded lap joints. The maximum design liquid level is 6 in. below the plane of juncture of the roof and sidewall.

The coating on the outer wall of API 650 SUG II tanks can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API 650 SUG II tanks with white coating can reduce the evaporation consumption of the oil tank.

Our company has a comfortable office environment, covers a large area, can accommodate hundreds of people working at the same time. All kinds of green plants are placed in the company, with a healthy office environment. Our company also has gym, table tennis, leisure bar, kitchen, refrigerator, microwave oven and other equipment. Humanized construction provides comfortable office environment for employees.

The company's headquarters has a well-established logistics distribution system, which can quickly transport the steel materials to the port through the contracted logistics companies. Professional contracted logistics companies can significantly reduce costs and various commodity-related expenses. Meanwhile, the flexible transfer ensures that the API 650 SUG II tanks steel materials can be shipped immediately after passing the quality inspection.

We should focus on the main problems to be solved and pay attention to efficiency. After receiving the user's quality objection report data, the possible causes, responsible units, compensation amount, etc. of the problem shall be judged based on experience. To have a clear service plan, to be clear about what your main problem is, what technical support is needed, these should be prepared.