API 650 stainless and carbon steel tank design external pressure

Weld inspection of API 650 stainless and carbon steel tank, vertical oil tank wall plate: In the welding inspection process of oil tank wall plate, attention should be paid to the defects of thick wall plate, such as incomplete penetration, incomplete root fusion and cracks. If there is a root incomplete penetration defect, it is necessary to open the weld joint with carbon arc air gouging and grinding machine grinding, or even weld through, and then weld again after the defect is removed.

Shell Stiffening Rings for Tanks That Contain Liquid
Internal or external shell stiffening rings may be required to maintain roundness when the tank is subjected to wind, vacuum, or other specified loads. When API 650 stainless and carbon steel tank stiffening rings are required, the stiffener-to-shell weld details shall be in accordance with Figure Q-1 and Q.3.5.2 through Q.3.5.5.
Three-plate laps or butt-weld junctions in tank bottoms shall be not closer than 12 in. from each other or from the butt-welds of the annular plates.
Bottom plates, other than annular bottom plates for a 9% or 5% nickel steel or stainless steel tank that contains liquid, may have a minimum thickness of 3/16 in. exclusive of any specified corrosion allowance.

Welding certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For both API 650 stainless and carbon steel tank storage tank API 650, non-destructive inspection is required, but third-party inspection is not required.

Our company has a strong, professional R & D team and advanced and perfect sales service concept, which makes our API 650 stainless and carbon steel tank products have a high visibility and market share at home and abroad. At the same time, we will always bear the principle of "credit first, customer first", always put the interests of customers first, and wholeheartedly provide each of our customers with the best products and services.