API 650 self anchored flatbottom tanks stored liquid

Any joints between the adjacent sections of API 620 oil storage tank stiffening rings, as shown in Figure Q-1, shall be made so that the required moment of inertia of the combined ring-shell section is provided. Weld joints between adjacent sections shall be made with full-thickness and full-penetration butt-welds. Stiffening-ring butt-welds may employ metal backing strips. Backing strips and the associated welding shall be made in a manner that provides a smooth contour in the rat hole and all other weld joint ends. All weld passes shall be started at the rat hole and other weld joint ends and shall be completed by moving away from these ends. Passes shall be overlapped away from edges to provide a smooth continuous weld.API standard 650, Welded Tanks for Oil Storage, Thirteenth Edition, has been published to ensure the safety, sustainability, and environmental performance of API 650 self anchored flatbottom tanks oil storage tanks. The updated standard will help continue operational excellence and trust between operators and manufacturers.Bangladesh is an important market to us. We cooperated with the National Railway, the National Tubes Limited (NTL) and so on state-owned enterprises. They have tenders regularly. And we would participate the tenders with our local agents. We have been the winner of NTL tenders for many times. API 5L grade B steel strips are their needed API 650 self anchored flatbottom tanks materials. They have special chemical composition, tolerance and so on requirements. We can fully meet their demands and guarantee timely delivery.Prefabrication requirements of API 650 self anchored flatbottom tanks, large vertical storage tank wall panels:
1. The prefabrication of wall panel shall be processed in strict accordance with the requirements of the drawings, and inspection records shall be made.
2. After the wall panel is rolled, it should be placed on the platform for inspection with a template. In the vertical direction, use a straight-line template to check, the gap should not be greater than 2 mm, and in the horizontal direction, use an arc-shaped template to check, and the interval should not be greater than 4 mm.
3. When wall panels are rounded, attention should be paid to prevent irreversible plastic deformation caused by external forces. After rolling, it should be placed on the platform for inspection, and then placed on the prepared mold.Due to other non-steel quality reasons caused by the customer dissatisfaction, to timely explain to the customer, and help them solve the problem, for the customer really because of their own reasons, to give patient reply.The process of objection handling is the process of our technical service.