API 650 self-anchored flat-bottom steel tanks repair

API 650 is the standard for welded tanks for oil storage. It specifies the API 650 self-anchored flat-bottom steel tanks design, manufacturing, welding, inspection and installation requirements of oil tanks. API 650 is widely used in storage tanks with internal pressure less than or equal to 2.5 PSI.

Pressure Setting of Safety DevicesExcept as provided in API 620 tank 9.5 for certain liquid relief valves, the pressure setting of a pressure-relieving device shall in no case exceed the maximum pressure that can exist at the level where the device is located when the pressure at the top of the tank equals the nominal pressure rating for the tank (see API 620 tank 5.3.1) and the liquid contained in the tank API 650 self-anchored flat-bottom steel tanks is at the maximum design level.Vacuum-relieving devices shall be set to open at such a pressure or partial vacuum that the partial vacuum in the tank cannot exceed that for which the tank is designed when the inflow of air (or other gas or vapor) through the device is at its maximum specified rate.

Static storage loss is also known as "small breathing" consumption. The rise and fall of the temperature in the API 650 self-anchored flat-bottom steel tanks leads to the increase and decrease of the pressure in the tank, which makes the mixed oil gas discharged from the tank, and the external air is sucked into the tank, resulting in the oil consumption. Fluid level loss is also called "big breathing" loss. It is the oil consumption caused by the change of gas space volume in the API 650 self-anchored flat-bottom steel tanks during the oil receiving and sending operation, which causes the mixed oil gas to be discharged out of the tank, and the external air is sucked into the tank, resulting in the oil consumption due to the change of liquid level height.

Integrity based:To customers, we should value our credit and keep our good image forever.To colleagues: respect each other, trust each other, make efforts togetherService first:Customer satisfaction is always the first pursuit.The company provides customers with not only advanced technology and high-quality API 650 self-anchored flat-bottom steel tanks products, but also the spirit of credit and service.Innovation:We are good at learning, drawing on the strengths of all, innovating and developing, introducing, researching and developing the latest technology, and making our products have a stronger vitality.

"Efficiency is benefit, time is money", the company is equipped with a high standard logistics team. After the products pass the factory inspection, they will coordinate the shipment as soon as possible according to customer requirements and schedules to hand over the booked steel materials to customers at the first time, to ensure no delay of customer's project progress, to strive for more project preparation time for customers.

Our quality and service commitment: API 650 self-anchored flat-bottom steel tanks product quality problems, life-long replacement.In the process of using, any time if you find we supplied steel materials not conform to the requirements of technical standards, we can replace it for you free of charge. However, it should be noted that non product quality problems caused by improper use are not covered by the warranty. Please pay attention to the service time commitment as well as the product quality assurance commitment. Because only the products of big brands and reliable enterprises with complete after-sales service system can truly realize the long-term product quality assurance and the whole process of service.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!