API 650 partially anchored liquid-storage tanks forgings
Inspection of Welded storage tanks Surfaces Exposed during FabricationThe edges of API 650 partially anchored liquid-storage tanks plates, openings and fittings exposed during fabrication shall be inspected carefully to make sure that any defects have been uncovered, as well as to determine that the work has been performed properly.Minor defects found may be repaired only after the inspector approves the method and extent of repairs. Materials that have more than minor defects that cannot be satisfactorily repaired shall be rejected.Spot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.
Compared with the fixed roof API 650 oil storage tank without API 650 partially anchored liquid-storage tanks floating roof, there is no evaporation space. In principle, this eliminates the so-called "large breathing loss". Evaporation not only causes the loss of product quantity, but also affects the quality of API 650 partially anchored liquid-storage tanks product and pollutes the environment.
In 2016. Our company offer 1200 tons API 5L GR.B hot rolled coil to Bangladesh——100 tons for 3.9*625mm, and 1100 tons for 7*683mm. It is one tender project, we get the tender at the end of 2015, and arrange the production in 2016. They required the tolerance of thickness is +0.1/-0.2mm, and width tolerance is +/-0.5mm, which is a very high requirement for coil tolerance, but our mill handling this very well. and our Q/C department witness all of the process.
}API 650 partially anchored liquid-storage tanks Drain hole: The drain hole is generally installed at the bottom of the oil tank, used to remove sludge when cleaning the oil tank, and usually used to drain the sewage in the tank. API 650 partially anchored liquid-storage tanks Safety valve: The role of the safety valve is to play a safety role when the breathing valve fails during the operation of the oil tank. Its working pressure is slightly higher than the pressure of the breathing valve, which can prevent the tank from being damaged due to the high positive or negative pressure in the tank. The safety valve is usually installed in the middle of the API 650 partially anchored liquid-storage tanks top.
After the order is finished, our after-sales service center will send an email to make a feedback about our steel products' quality. We have phone service every three months to remind our customers of the possible problems and collect advices or suggestions in quality and service. Upon the collection of advices or suggestions, our after-sales service will quickly make technical solutions to wipe out the customer problem.
