API 650 insulated tanks lateral loads on columns

BEBON is a large steel group with finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. We are committed to creating a various culture system with its own characteristics, and work hard to create a first-class steel plate company in China. Based on the business philosophy of quality-oriented and strengthened management, the company continues to develop in this industry.Combination of Design Loads
The inner tank API 650 insulated tanks shall be designed for the most critical combinations of loading that result from internal pressure and liquid head, the static insulation pressure, the insulation pressure as the inner tank expands after an in-service period, and the purging or operating pressure of the space between the inner and outer tank shells, unless the pressure is equalized on both sides of the inner tank.The thickness of the overburden on the top of the API 650 oil tank should not be less than 0.5m. The surrounding backfill with clean sand or fine soil should be no less than 0.3m thick; the API 650 oil tank API 650 insulated tanks operation platform ladder selection unit is considered in a unified manner. The buried operation well is designed for buried horizontal oil tanks, and the two are compatible.Our company has a strong, professional R & D team and advanced and perfect sales service concept, which makes our API 650 insulated tanks products have a high visibility and market share at home and abroad. At the same time, we will always bear the principle of "credit first, customer first", always put the interests of customers first, and wholeheartedly provide each of our customers with the best products and services.Welding inspection of bottom plate of API 650 insulated tanks, vertical oil tank: During the fabrication and installation of API 650 insulated tanks, the bottom edge plate is welded first. According to the requirements of the technical standard, penetrant inspection is required for the weld of edge plate at the bottom of API 650 insulated tanks, that is, penetrant testing is required for each weld bead priming, filling and capping. In the process of testing, if any defect is found, it shall be repaired immediately. After the repair, the surface coloring penetrant test shall be conducted again until the test result is qualified.