API 650 horizontal tank swing-type check valve

The thickness of the API 650 horizontal tank wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 0.57 in. The nozzle neck is seamless steel pipe and conforms to ASTM A53, Grade A; the materials in the tank wall and reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank walls are fully radiographed, double-welded butt joints. The adequacy of the reinforcement and attachment welds shown in Figure F-7 shall be determined.
To determine the length of the nozzle neck within the limits of reinforcement, the smaller of the following calculated values shall be used:(2.5)(0.625) = 1.56 in.
(2.5)(0.375) + 0.75 = 1.69 in.

Under the same sealing effect, the internal API 650 horizontal tank floating roof API 650 tank can further reduce the evaporation loss compared with the external floating roof API 650 tank. This is due to the shielding of the fixed roof and the gas phase layer between the fixed roof and the inner floating plate, which has more significant heat insulation effect than the double disc floating roof of the API 650 horizontal tank external floating roof tank.

Tunisia cutomer purchased around 1500 tons 304L,310S stainless steel plate from us and make tanks in August, 2017. The company was skilled in the design and manufacture of stainless steel tanks, API 650 horizontal tank processing systems and equipment for the food, dairy, beverage, chemical, pharmaceutical, biotechnology, and pure water industries. They also sent the inspection team come our company and visited our production line. After using our stainless steel plate, the customer was very satisfied with our products.

The coating on the outer wall of API 650 horizontal tank can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API 650 horizontal tank with white coating can reduce the evaporation consumption of the oil tank.

Both parties shall confirm the API 650 horizontal tank material object and the quality of the products, confirm the reasons for the defects and the quality of the products, and sign the quality inspection agreement. Major quality objections shall be reported to relevant leaders in a timely manner, and shall be discussed and solved with the API 650 horizontal tank steel plant.