API 650 flat-bottom tanks shell plates

The impression of most customers who have cooperated with us on the company is being professional and responsible. That mainly owe to our united and considerate team members. For example, the professional technician, the responsible QC inspector, the experienced sales person, the rigorous document maker, the patient after-sales, etc. Their selfless devotion bring the customer good experience, and bring the company good reputation.Butt-welded joints used to fabricate large steel storage tank fittings shall be completely radiographed. Lines carrying liquid shall be hydrostatically or pneumatically pressurized at a minimum pressure of 35 lbf/in.2 and API 650 flat-bottom tanks butt welded joints shall be simultaneously visually examined (hydrostatic) or solution film tested (pneumatic) for tightness. If manufactured pipe has been hydrostatically tested previously to ASTM requirements, then only circumferential welds need to be examined.Structural features of API 650 double-layer oil tank: steel glass fiber reinforced plastic double-layer structure, special processing method is adopted between the API 650 flat-bottom tanks internal steel shell and glass fiber reinforced plastic layer, so that a gap of 0.1 mm is created between the internal and external layers. Even if the API 650 oil storage tank leaks, it can ensure that the contained dangerous substances only flow in the gap, and will not immediately overflow the external environment.We have a high-quality elite team, with a wealth of steel products resources and business experience. The company has established a perfect career development channel to provide all employees with broad job development opportunities, clear career planning, so that the potential can be fully explored, talent can be fully exploited, and a platform for employees to realize the value of life can be built, so as to realize the common growth and development with employees in the long-term development of the company.Natural ventilation loss: the main cause of natural ventilation loss is that the API 650 flat-bottom tanks is not tightly sealed. This is usually due to corrosion perforation on the top of the oil tank, or there is a height difference between the two orifices. The air tightness of the mixture in the API 650 flat-bottom tanks is higher than that of the air, which causes the mixture gas in the tank to be discharged into the atmosphere from the lower hole, and the external air flows into the tank from the high hole, resulting in natural ventilation loss.