API 650 cylindrical welded storage tanks bottom joints

Requirements for prefabrication of the top of large vertical API 650 cylindrical welded storage tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

Vertical Storage Tanks Security against Damage
The assemblies of relieving devices shall be secured against damage in service, the effects of storms, or mishandling. Access ladders and platforms that meet API 650 cylindrical welded storage tanks plant safety rules are suggested.
Vacuum-relieving Devices
A vacuum-relieving device, when used, shall be as direct in inflow as possible with no pockets where moisture can collect, and it shall have no piping except a weather hood ahead of the inlet. An adequate vacuum-air inlet shall also be provided.

Prevent the storage liquid from impacting the inner wall of the API 650 petroleum storage tank or increase the internal pressure, reduce the corrosion of the tank top and the tank wall, and extend the service life of the API 650 cylindrical welded storage tanks storage tank.

Safety production is the cornerstone of enterprise survival and development. The company established a safety management network, which achieved clear powers and responsibilities, clear responsibilities, effective management and control, and provided organizational guarantee for safe production. The company strictly complies with the "Environmental Protection Law", establishes an effective environmental protection emission control system and waste gas, waste water, waste solid recycling system, and makes great efforts to harden, lighten, green, and beautify the plant, and strive to build green steel enterprises.

The company adheres to the business philosophy of "good quality, customer first, honesty and trustworthiness", and strives to provide customers with high-quality API 650 cylindrical welded storage tanks products and excellent services. Our company's products API 650 cylindrical welded storage tanks are widely used in petroleum, chemical, power station, boiler and other industries, mainly used in reactors, heat exchangers, separators, spherical tanks, oil and gas tanks, liquefied gas tanks, nuclear energy reactor pressure shells and other equipment.