API 650 aluminum tanks mixers

BBN company team and culture: tt the end of 2019, in order to thank employees for their hard work and enrich their sparetime lives, the company organized a pleasant trip to Phuket Island, Thailand. This tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5o'clock in the afternoon on the 22th December. Let's seize the day and live it to the full, and greet the arrival of the year 2020 together.In this project, an elemental area of tank wall used is constructed of ASTM A442 Grade 55 steel plate subjected to a meridional unit force, T1, of 4000 lbf/in.2 tension and a latitudinal unit force, T2, of 5060 lbf/in.2 compression. The meridional radius of curvature, R1, is 75 in., and the length of the normal from the surface to the axis of revolution, R2, is 300 in. The joints in the wall are of double-welded butt-joint construction with a tensile efficiency of 85%. A corrosion allowance of 1/16 in. is required.
The problem in this example is to graphically find the minimum thickness of tank wall required for the given conditions (see 5.10.3.3).
Solution: As determined from Table 5-1, the maximum allowable tensile stress value, Sts, for ASTM A442 Grade 55 steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R in this situation is R1, or 75 in.API 650 is constructed from carbon steel, austenitic duplex stainless steel, and API 650 aluminum tanks aluminium A Welding Certification is stipulated by American Society of Mechanical Engineers (ASME), Section 10. There is a required inspection, no third party. The inspection cost is the cost of the NDE.We had a wonderful trip in Phuket Island, Thailand. At the end of 2019, in order to thank employees for their hard work for a year and enrich their lives, our company organized a pleasant trip to Phuket Island, Thailand. The tour lasted 6 days and 5 nights, and returned by plane on the evening of December 27. We took off in Zhengzhou at about 5 o'clock in the afternoon on the 22th December.After using for a certain period of time, it is necessary to check the corrosion protection of the metal oil tank and paint the outer wall of the API 650 aluminum tanks with anti-corrosion paint. The inlet and outlet valves of API 650 aluminum tanks shall be inspected and maintained regularly to ensure they are in good condition. Oil tank will produce a lot of dirt when it is stored for a long time. Usually, the cleaning cycle of metal oil tank is about three to five years.