aluminum sheet 5652 API standard 650 flat-bottom steel tanks

API 650 petroleum storage tanks use lightning protection, anti-static, and fire protection measures. The internal corrosion protection should be determined according to the API standard 650 flat-bottom steel tanks storage medium, and the outer wall corrosion protection should be determined according to the soil quality of the buried tank.

The API standard 650 flat-bottom steel tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.

The cone slope of the completed API standard 650 flat-bottom steel tanks foundation is 15/1000 for the general foundation and less than 35/1000 for the soft foundation. After the foundation settlement of the storage tank is basically stable, the surface slope must be greater than eight thousandths. The edge of the tank bottom should be more than 0.3 meters higher than the surrounding ground. Above the ground, the tank bottom leakage detection tube should be drawn from the foundation sand cushion and cross the foundation ring wall or the slope protection surface. The circumferential distance should be less than 20 meters, and each API standard 650 flat-bottom steel tanks should have at least 4 detection tubes.

The company has always adhered to the corporate purpose of “improving benefits, creating wealth, benefiting employees, and giving back to the society”. We adhere to the corporate spirit of ""innovation, efficiency, integrity, and win-win"", attract first-class talents, strive for first-class indicators, create first-class benefits, build first-class enterprises, pursue excellence, innovative development, and efficiently serve the coordinated development of the Beijing-Tianjin-Hebei and the ""Belt and Road"" Economic development strategy.BEBON is willing to cooperate with friends from all sides for a win-win development!

The main competitive means adopted by major domestic ports are to expand ports, build deep-water berths and channels, improve service quality to reduce the comprehensive cost of customers, and at the same time, to improve competitive advantage, we should also take appropriate measures to reduce relevant costs and prices.

The after-sale service of iron and steel products includes after-sale tracking service, technical guidance, transfer of relevant bills, handling of objections and many other contents. The handling of quality objections accounts for a large proportion. When dealing with these problems, we should distinguish the responsibilities, and compensate or return the inconvenience or loss caused to users due to steel.