aluminum sheet 5052 API standard 650 special tank
API 650 petroleum storage tank basic knowledge, storage tank concept and use: API standard 650 special tank storage equipment for storing crude oil, gasoline, kerosene, petroleum and various non-volatile chemicals, API 650 petroleum storage tank is a storage and transportation system facility, oil refining, chemical industry An important part of the device.
The API 620 large storage tank nozzle neck is fabricated by welding from 1/2-in. plate. The materials in the tank wall, the nozzle neck, and the reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank wall are fully radiographed, double-welded butt joints. The longitudinal joint in the nozzle neck is of the same type API standard 650 special tank but is not radiographed; however, the longitudinal joint and all other parts of the nozzle-and-wall-plate assembly have been shop stress relieved after fabrication, as required by 5.25. The adequacy of the reinforcement and attachment welds shown in Figure F-6 shall be determined.
Generally, the building area temperature of the API standard 650 special tank should be considered before the tank design and construction. The temperature in the API standard 650 special tank building area is closely related to the evaporation loss, energy loss, storage tank materials and the selection of detection instruments, or has a direct impact on the storage cost of the storage liquid. For the same medium, the higher the air temperature and the longer the duration, the higher the material temperature in the API standard 650 special tank, the higher the corresponding pressure and the more volatile loss.
"Adhere to green development, implement basic national policies to conserve resources and protect the environment, and take the goal of creating a resource-saving and environment-friendly iron and steel joint enterprise to promote the construction of ecological civilization.Strengthen the construction of core talents, further release the talents' innovative wisdom and innovation potential, and promote the efficient and high-quality development of enterprises. Adhere to the people-oriented principle, persist in relying on employees for development, share development results with employees, and build a harmonious enterprise."
The company's logistics team adheres to the development concept of “gathering advantages, providing superior services, creating value, and leading the market”, and tightly focuses on the strategic positioning of “developing large-scale steel logistics and building large-scale steel supermarkets”. Facing the whole country and integrating into the world to build an "one center, one network" international circulation system. Through the development of 5-10 years, it is expected to form a modern steel industry with annual operating income exceeding 2.5 billion yuan.
When providing technical services on site, the after-sales personnel shall strictly abide by the safety rules and regulations of the construction site, consciously take safety protection measures (such as wearing safety helmet when entering the construction site), accept the supervision and management of the site; without permission on the construction site, they shall not dismantle, smear or damage any goods; the commissioning of contract goods shall be carried out under the supervision of the site supervisor If necessary, it shall be approved by the site supervisor or the person in charge of the project department.
