A841 grade A class 1 plates API standard 650 ground supported liquid storage tanks

For floating roof API 650 tanks, the net working capacity is the liquid volume contained between the API standard 650 ground supported liquid storage tanks maximum operating level (300 mm below rim for metallic type seals and 600 mm below rim for fabric type seals) and the minimum operating level (API 650 tanks roof supports clearing the tank bottom by 25 mm while set at the operating position).

The coating on the outer wall of API standard 650 ground supported liquid storage tanks can not only reflect light but also prevent corrosion. Different coatings for oil tanks have different reflective properties, and the reflective performance of coatings is expressed by reflection index. For example, the reflection index of white coating is 90.0, that of sky blue coating is 85.0, and that of light gray coating is 57.0. It can be seen that the white coating has good reflective performance, and coating the outer surface of API standard 650 ground supported liquid storage tanks with white coating can reduce the evaporation consumption of the oil tank.

In this project, an elemental area of tank wall used is constructed of ASTM A442 Grade 55 steel plate subjected to a meridional unit force, T1, of 4000 lbf/in.2 tension and a latitudinal unit force, T2, of 5060 lbf/in.2 compression. The meridional radius of curvature, R1, is 75 in., and the length of the normal from the surface to the axis of revolution, R2, is 300 in. The joints in the wall are of double-welded butt-joint construction with a tensile efficiency of 85%. A corrosion allowance of 1/16 in. is required.
The problem in this example is to graphically find the minimum thickness of tank wall required for the given conditions (see 5.10.3.3).
Solution: As determined from Table 5-1, the maximum allowable tensile stress value, Sts, for ASTM A442 Grade 55 steel plate in simple tension is 16,500 lbf/in.2. Since the compressive stress is latitudinal, the governing value of R in this situation is R1, or 75 in.

BEBON is a large steel group with finance department, production department, sales team, technical department, quality control department, logistics department and after-sales service team. We are committed to creating a various culture system with its own characteristics, and work hard to create a first-class steel plate company in China. Based on the business philosophy of quality-oriented and strengthened management, the company continues to develop in this industry.

BBN company has steel plates production workshops and warehouses with a total area of more than 500,000 square meters, and the total inventory of various types of steel exceeds 1 million tons. Relying on world-leading processing equipment and storage facilities, the company has strong steel production and processing capabilities, comprehensive logistics and logistics services, ensuring that it can efficiently complete more than 1 million tons of hot rolled plates processing business each year.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!