A662 grade B plates API standard 650 aluminum tanks
The standard API 650 covers the design and calculation of different parts of the API standard 650 aluminum tanks fuel tank. This specification is based on the knowledge and experience of buyers, manufacturers and users of API 650 welded storage tanks of different sizes and capacities. It is worth noting that the code requirements are minimal; stricter standards can be adopted for specific applications.
All API standard 650 aluminum tanks fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole, and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.
The cone slope of the completed API standard 650 aluminum tanks foundation is 15/1000 for the general foundation and less than 35/1000 for the soft foundation. After the foundation settlement of the storage tank is basically stable, the surface slope must be greater than eight thousandths. The edge of the tank bottom should be more than 0.3 meters higher than the surrounding ground. Above the ground, the tank bottom leakage detection tube should be drawn from the foundation sand cushion and cross the foundation ring wall or the slope protection surface. The circumferential distance should be less than 20 meters, and each API standard 650 aluminum tanks should have at least 4 detection tubes.
Integrity, cooperation and innovation, positive and competitive, healthy and abundant are the company's core values. The company API standard 650 aluminum tanks always adhere to the "people-oriented", pay attention to improve the production skills and cultural quality of employees, by cultivating employees to carry forward excellent cultural traditions, set up the correct values, ethics and codes of conduct to improve employees' loyalty and work enthusiasm.
As steel transportation belongs to the transportation of major parts, so in the process of transportation, modern logistics technology, such as centralized transportation, information technology, is a bit out of place. Based on the current situation of China's API standard 650 aluminum tanks steel transportation industry, highway transportation is a way of transportation that many enterprises often choose. Naturally, its business volume also accounts for more than 50% of the whole API standard 650 aluminum tanks steel transportation industry.
From the order to the delivery, there are three quality inspections to ensure that the qualified rate of finished products is more than 100%. We promise that every order will be tracked in a timely manner to ensure that customers can receive goods safely and constantly listen to their opinions and suggestions, reflect on our own problems, and let customers feel at ease. We have a large warehouse in Shanghai and Tianjin, which can provide customers with sufficient sources of supply.
