A573 grade 58 plates API Std 650 storage tanks

The technology center has always been focusing on application research, improving market realization and scientific and technological contribution rate; taking user demand as the goal, highlighting the personalized development of products; taking the joint development of industry, University and research, and technology integration as the means, improving the starting point and level of innovation, and realizing the breakthrough of core technology; taking advanced research as the guide, pursuing the leap of technological development; taking system and mechanism innovation as the driving force, Promote and realize the working concept of technological innovation.The API Std 650 storage tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.API 650 can store oil, gas, chemical, water and biofuel for some of the most common tanks in the oil industry. API 650 can store contents at a lower pressure (maximum of 2 PSI) but at much higher temperature (-40 degrees F to 500 degrees F) than the standards of API Std 650 storage tanks It can be any tank sizeThe cultural construction must let the enterprise staff participate in the enterprise culture, in order to better carry on the effective dissemination enterprise idea, the sharing value system, such as the internal communication, the newspaper, the forum, the propaganda, the news announcement and so on At the same time, the system can also be used to educate and train employees, send blessings to employees on their birthdays or during Chinese New Year holidays, so that employees can feel the practice of corporate culture, the warmth of the enterprise, and enhance the sense of belonging and recognition of the enterprise,API Std 650 storage tanks. Manhole: The manhole is used for the operator to enter and exit the oil tank for inspection, cleaning and repair. For the convenience of personnel access, the installation position of the manhole is generally on the center line of the oil tank bottom, and the vertical oil tank is installed at the lowest layer of the tank wall. API Std 650 storage tanks Light-transmitting hole: Light-transmitting hole is also called day-lighting hole. It is used for lighting and ventilation when inspecting, repairing and scrubbing the oil tank. It is generally installed on the top of the oil tank above the inlet and outlet pipes.