A350 grade LF2 forgings API 650 self anchored flatbottom tanks

Structural features of API 650 double-layer oil tank: steel glass fiber reinforced plastic double-layer structure, special processing method is adopted between the API 650 self anchored flatbottom tanks internal steel shell and glass fiber reinforced plastic layer, so that a gap of 0.1 mm is created between the internal and external layers. Even if the API 650 oil storage tank leaks, it can ensure that the contained dangerous substances only flow in the gap, and will not immediately overflow the external environment.

Crack treatment of API 650 self anchored flatbottom tanks weld area: find out the crack tip with ray or ultrasonic flaw detection, drill cut-off holes at both ends of the crack with the cut-off method, the hole depth is slightly greater than the crack depth, or groove (crack stop groove) is made by angle grinder at both ends of the crack, shovel and grind the whole crack, and grind it into a suitable groove; use radiographic inspection and dye detection to verify that the crack has been completely excavated, and finally repair welding.

The tank shall be filled with water to the design liquid level unless height is limited as noted in API 620 standard Q.8.1. After the tank is filled with water and before the pneumatic pressure is applied, anchorage, if provided, shall be tightened against the hold-down brackets. All welds in the API 650 self anchored flatbottom tanks shell, including the corner weld between the shell and the bottom, shall be visually checked for tightness.

Our team is a dynamic, but also mature and steady team. The talents are made of different ages. There are experienced ones, and also creative ones, that also makes our company culture diversified. We have complete department structure, to make the whole work procedure run smoothly. For every step, we have special person to be in charge and responsible for our customer and update information to the customer in time. So you just need not worry too much to purchase steel materials from our company.

In view of the characteristics of container transportation, such as high added value, low cargo damage and short time, our company takes more consideration of port collection and distribution conditions, port facilities, flight density and route coverage when choosing ports. For the convenience of customers, as well as the safety of goods.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!