A234 grade WPB pipe API Std 650 mechanically-anchored steel tanks

The reticulated API Std 650 mechanically-anchored steel tanks shell API 650 storage tank is an important large-span space structure with high safety. Generally, the large-scale API 650 storage tank with a diameter of 21-60 meters or a volume of more than 20000 cubic meters should adopt the reticulated shell technology, which has been widely promoted and adopted in the world and China's petrochemical industry for more than 30 years.

The shipping department of the company arranges shipping booking for customers' goods in advance, and makes good matching with inland transportation. Effectively manage and follow up the customer's shipping schedule and give feedback to customers in time. At the same time, the shipping department has a keen insight into the shipping market in different periods to reduce the transportation cost for the company and customers.

Our company will accept the product quality objection registration record, pass it to the API Std 650 mechanically-anchored steel tanks production unit and relevant departments, and timely coordinate the supervision of product API Std 650 mechanically-anchored steel tanks quality objection. Our company coordinates the relevant department personnel to the customer unit to carry on the investigation, the processing.

The API Std 650 mechanically-anchored steel tanks stiffener ring and backing strip (if used) are primary components, and they shall comply with the requirements of API 620 storage steel tank Q.2.1. The stiffener rings may be fabricated from plate using an intermittent weld on alternating sides between the web and the flange.
Except for aluminum or stainless steel tanks, all fillet welds shall consist of a minimum of two passes. The ends of the fillet welds shall be 2 in. from the rat hole (see Figure Q-1), and these welds shall be deposited by starting 2 in. from the rat hole and welding away from the rat hole. An acceptable alternative to the detail that includes stopping fillet welds 2 in. short of the rat hole would be to weld continuously through the rat hole from one side of the stiffener to the opposite side. All craters in fillet welds shall be repaired by back welding.