5454 aluminum pipe API 650 self-anchored tanks

Corrosion of the API 650 self-anchored tanks body caused by external conditions such as high temperature, rain, humidity, or inadequate anti-corrosion measures of the oil storage tank itself, the water-bearing deposits in the oil storage tank caused corrosion and perforation of the inner surface of the oil storage tank bottom plate. Defects fatigue cracks caused by stress, with the accumulation of time, the compressive strength of the API 650 self-anchored tanks body decreases and corrosion cracks occur.

The thickness of the API 650 self-anchored tanks wall plate, t, required by 5.10.3 for the latitudinal unit forces, T2, acting at this level is 0.57 in. The nozzle neck is seamless steel pipe and conforms to ASTM A53, Grade A; the materials in the tank wall and reinforcing pad conform to ASTM A442 Grade 55. The main joints in the tank walls are fully radiographed, double-welded butt joints. The adequacy of the reinforcement and attachment welds shown in Figure F-7 shall be determined.
To determine the length of the nozzle neck within the limits of reinforcement, the smaller of the following calculated values shall be used:(2.5)(0.625) = 1.56 in.
(2.5)(0.375) + 0.75 = 1.69 in.

For floating roof API 650 tanks, the net working capacity is the liquid volume contained between the API 650 self-anchored tanks maximum operating level (300 mm below rim for metallic type seals and 600 mm below rim for fabric type seals) and the minimum operating level (API 650 tanks roof supports clearing the tank bottom by 25 mm while set at the operating position).

The company always adheres to the concept of green production, follows the development path of innovation, transformation and improvement, and has carried out in-depth cooperation with Zhengzhou University and other scientific research institutes, planning from a high starting point, strict standard design, and successfully implementing engineering projects With nearly 20 research and development projects, the company's production technology and equipment are at the forefront of the industry, and indicators such as environmental protection, energy consumption, cost, and resource utilization have reached the advanced level in the industry.

The gas cylinder steel is one of our featured products. The pickled LPG steel is available. We supply gas cylinder steel coil, gas cylinder steel sheet and gas cylinder API 650 self-anchored tanks steel plates. Welcome to consult any question about gas cylinder steel or LPG steel, such as JIS G3116 SG295 coil price, SG255 material properties, SG325 plate dimensions, HP265 equivalent, P245NB steel properties, etc. We are always here to serve you.