5254 aluminum pipe API standard 650 stainless and carbon steel tank
refrigerated tanks secondary components are those whose failure would not result in leakage of the liquid being stored. Secondary components also include those API standard 650 stainless and carbon steel tank components that are not in contact with the refrigerated liquid but are subject to the refrigerated temperature vapors and have a combined tensile and primary bending stress under design conditions that does not exceed 6000 lbf/in.2. Secondary components that could be designed within this reduced stress are roof plates, including roof manways and nozzles with their reinforcement, roof-supporting structural members, and shell stiffeners.
The API 650 petroleum storage tank standard is one of the most widely used design specifications. It is the API 650 standard of the American Petroleum Institute. The main goal of the API 650 standard is to promote the purchase and construction of vertical, above-ground, and welded manufacturing API standard 650 stainless and carbon steel tank tanks through the requirements contained in its parts to ensure that the required safety regulations are met.
Shipping 1000MT low alloy steel plate and cutting sectors to Mexico in 2014. Andritz is One Of Biggest company In globe world. Our company Win The Tender With Lauca project In Mexico To Offer 1000MT Steel Plate API standard 650 stainless and carbon steel tank to them.The Steel plate need to do cutting according the drawing by standard tolerance,UT,MT and dimension request.After Get Customer Contract, Steel Plate Are Produced within 40 days .Then, Goods Trucked To Shanghai Loading Port Soon And Shipping In Time To Statisfy With Project Expected After Finished Producing. The Steel Quality Had Been Get Customers’Praise."
}API standard 650 stainless and carbon steel tank weld tightness test: remove dirt from the API standard 650 stainless and carbon steel tank weld, apply white powder emulsion, spray kerosene on the other side of the weld after drying. Because of the strong penetration of kerosene, if kerosene is sprayed after 12 hours (under low temperature conditions, the time can be extended), if the surface of the welded seam coated with white emulsion has no spots, the welded seam meets the requirements.
If customers have any difficult problems during use of the steel materials, they can contact the company's after-sales service department to feedback the existing problems. The after-sales department will reply as soon as possible to ensure that each customer has a good after-sales experience. Under special circumstances, the after-sales service department will start the problem-solving process, and the engineers in charge of the area will quickly follow up to solve the problem.
