5154 aluminum shapes API Std 650 self-anchored flat-bottom steel tanks

Standard API 650 tank calls for calculations based on the specific gravity of the liquid product being stored. This permits the thickness of the steel API Std 650 self-anchored flat-bottom steel tanks needed as well as other specifications of how the tank is built to be determined by the weight of the API 650 tank.

Tank cracks are common API Std 650 self-anchored flat-bottom steel tanks defects, mainly including tank wall cracks, internal cracks, weld zone cracks. The reason for these defects may be that the defects not exceeding the standard existed in the early stage of API Std 650 self-anchored flat-bottom steel tanks construction, which become obvious after the later use. Or in the process of using the API Std 650 self-anchored flat-bottom steel tanks, the tank body material generated new defects due to corrosion, pressure, wear and other reasons, and tank cracks.

Density of API Std 650 self-anchored flat-bottom steel tanks Liquid Stored
The density of the liquid stored shall be its maximum density within the range of design temperatures, but no less than 29.3 lbf/ft3 for methane, 34.21 lbf/ft3 for ethane, and 35.5 lbf/ft3 for ethylene.
Design Metal Temperature
The design metal temperature of each component exposed to the liquid or vapor being stored shall be the lower of the temperatures specified as follows: The design metal temperature of the components of the API 620 single-wall tank or the inner tank of a double-wall tank shall be the minimum temperature to which the tank contents shall be refrigerated, including the effect of subcolony at reduced pressure.

Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the API Std 650 self-anchored flat-bottom steel tanks project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of API Std 650 self-anchored flat-bottom steel tanks customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.

Box making, door-to-door: fill in the packing plan: box making time, ship name, voyage number, customs declaration number, transfer port, destination port, gross weight, number of pieces, volume, door point, contact person, telephone number, etc., and arrange the train shift 1-2 days before the closing date (two days before the ship's date). Internal loading: fill in the packing plan: ship name, voyage number, customs declaration number, transfer port, destination port, gross weight, number of pieces, volume, cabin number, etc., and arrange the train shift 1-2 days before the closing date (two days before the ship's date).