5086 aluminum tube API 650 aluminum tanks
The standard API 650 covers the design and calculation of different parts of the API 650 aluminum tanks fuel tank. This specification is based on the knowledge and experience of buyers, manufacturers and users of API 650 welded storage tanks of different sizes and capacities. It is worth noting that the code requirements are minimal; stricter standards can be adopted for specific applications.
Storage tank is used to store all kinds of liquid, solid and gas materials. The common types of storage tank are oil tank, water storage tank, chemical tank, cement tank, API 650 aluminum tanks, etc. When choosing the storage tank, users should choose according to their actual needs, such as the material, pressure, form, capacity, temperature, density, etc. In addition, the environmental factors such as the temperature of the tank construction area, the ground endurance of the foundation, and the wind force should be considered.
Inspection of low-pressure storage tank Butt-weldsComplete penetration and complete fusion is required (to the degree mandated by the acceptance criteria for examination method utilized) for welds joining tank wall plates to API 650 aluminum tanks tank wall plates. Examination for quality of welds shall be made using either the radiographic method specified in API 620 standard 7.15.1 and applied in 7.17, or alternatively, by agreement between the Purchaser and the Manufacturer, using the ultrasonic method specified in 7.15.3.1. In addition to the radiographic or ultrasonic examination, these welds shall also be visually examined as specified in 7.15.5. Furthermore, the Purchaser’s inspector may visually inspect all butt-welds for cracks, arc strikes, excessive undercuts, surface porosity, incomplete fusion, and other defects.
Our company will set up a full-time service engineer for the project, who is responsible for the interface and coordination of technical support and after-sales service of the API 650 aluminum tanks project. In response process of customer service center, in case of technical support and after-sales service demand, the user shall contact the full-time engineer of API 650 aluminum tanks customer service center, and the technical personnel will give corresponding answers and on-site treatment according to the needs of users.
The company has our own truck fleet, and can transfer products flexibly and quickly. At the same time, we have large warehouses near the ports of Tianjin and Shanghai, so as to ensure that we can deliver high-quality products to customers in the first time. At the same time, it also greatly reduces the transportation cost, and realizes the double harvest of time benefit and economic benefit. Time guarantee is one of the important strengths of our service.
