48m diameter API 650 self-anchored flat-bottom tanks

API 650 petroleum storage tank stipulates that if the thickness of the lower siding obtained by calculating the anti-overturning moment is greater than the thickness of the API 650 self-anchored flat-bottom tanks hydrostatic pressure test (both do not include the corrosion margin), the calculated thickness of the above siding required by the hydrostatic pressure is It should also be increased by the same proportion, unless special analysis is performed to determine the seismic overturning moment and corresponding stress at the bottom of each layer of API 650 petroleum storage tank wall.

All oil tanks have service life. Due to the pressure of the oil stored on the tank and the corrosion of the oil and external environment on the tank, the oil storage tank will gradually become thin or crack after a long time. Due to the different materials and environment of API 650 self-anchored flat-bottom tanks, the consumption of API 650 self-anchored flat-bottom tanks is different, so it should be taken into account when evaluating the remaining service life of API 650 self-anchored flat-bottom tanks.

When roof plates, knuckle plates, compression rings, and manways and nozzles including reinforcement are primarily subjected to atmospheric temperature, the rules in API 620 oil tank standard Q.2.3 shall govern.
Large Welded Storage Tanks Secondary Components
In general, secondary components include those components that will not be stressed to a significant level by the refrigerated liquid, those whose failure will not result in leakage of the liquid being stored, those exposed to product vapors, and those that have a design metal temperature of –60°F or higher.

Our company is a specialized technical support and after-sales service organization - customer service center. At the same time, we have provided excellent technical API 650 self-anchored flat-bottom tanks personnel and strong technical support for our company, and cultivated an excellent after-sales team for our company. Our company will appoint a full-time service manager to be responsible for the unified coordination of technical support and API 650 self-anchored flat-bottom tanks after-sales service of the project.

Japan is a typical shipping first, and its raw materials are imported from Oceania, central and South America and other Asian countries. Most of the API 650 self-anchored flat-bottom tanks steel produced is exported to China and other Asian countries, and a small amount is exported to America. Shipping is the main way of its API 650 self-anchored flat-bottom tanks steel international transportation. According to the data, steel goods account for about 20% of the total sea freight in Japan. The domestic transportation of Japanese steel is mainly truck.