40ft diameter API Std 650 liquid-storage tanks

Inspection of Welded storage tanks Surfaces Exposed during FabricationThe edges of API Std 650 liquid-storage tanks plates, openings and fittings exposed during fabrication shall be inspected carefully to make sure that any defects have been uncovered, as well as to determine that the work has been performed properly.Minor defects found may be repaired only after the inspector approves the method and extent of repairs. Materials that have more than minor defects that cannot be satisfactorily repaired shall be rejected.Spot radiographic or ultrasonic examination shall be not less than 6 in. extending along the weld. Spot radiography shall comply with the standards given in 7.15.1.3. Where spot radiographic or ultrasonic examination is applied at joint intersections, the surface shall be prepared and examined for a distance of 3 in. on each side of the intersection, making the minimum length of examination 6 in. on the horizontal weld and 3 in. on the vertical weld.

This API 650 tank standard is designed to provide industry with tanks of adequate safety and reasonable economy for use in the API Std 650 liquid-storage tanks storage of petroleum, petroleum products. and other liquid products.

In the year of 2015, customer from Peru oil refinery contact with us from Internet. After one month’s negotiation and quotation, they chose us as there supplier of raw steel plate API Std 650 liquid-storage tanks grade ASTM A36. We get an trail order of 300 tons in April. When the first ship arrived, they inspect the steel plate and very happy with the quality we supply. Then they put another 1700 tons order, we sent to them within 90 days. Our company management group visit the customer in the beginning of 2016 and the visit is very successful.

}

Requirements for prefabrication of the top of large vertical API Std 650 liquid-storage tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.

The 365 day service system is implemented, and the business, loading and delivery are handled as usual in holidays and festivals. Actively help users solve difficulties. When users encounter difficulties in handling business, they should actively coordinate with the external solution; if they need to solve the problems internally, they should solve them in a timely manner without prevarication and wrangling. In line with the API Std 650 liquid-storage tanks principle of "fairness, justice and timeliness", coordinate with relevant departments and deal with all kinds of objections in a timely manner.

Have a question? Get a Free Consultation

If you are interested in our storage tanks, you can get contact with us through online consulting, demand table submission, e-mails and telephones.

Corporate Office

High-Tech Development Zone, Zhengzhou, China

Contact us

+86-371-86151527
[email protected]

Send a Message!