40ft diameter API standard 650 stainless steel storage tanks
API 650 petroleum storage tanks are used for API standard 650 stainless steel storage tanks storage. API 650 petroleum storage tanks can be made of carbon steel, austenitic stainless steel and nickel alloy (only for low temperature). Welding API standard 650 stainless steel storage tanks certification is regulated by Section 10 of the American Society of Mechanical Engineers (ASME). For API 650 petroleum storage tanks, non-destructive inspections are required, but third-party inspections are not required.
Requirements for prefabrication of the top of large vertical API standard 650 stainless steel storage tanks: The prefabrication of the tank top shall be prefabricated in blocks according to the drawings. Pay attention to the spacing of the welds after installation when setting out the material. Reinforcing ribs should be formed and inspected with an arc-shaped template. When a single top plate needs to be spliced, butt joints should be used. The forming of a single top plate should be welded between the reinforcing ribs and the top plate on the mould. After forming, check with an arc-shaped sample plate, and the gap should not be greater than 10 mm.
In addition to the requirements of API Standard 620 tank Appendix Q.8.1, the nameplate shall be attached to the tank at an accessible location if it is outside of any insulation or protective covering of the tank. The nameplate for the inner tank shall be located on the outer tank wall but shall refer to the inner tank. The nameplate, if any, for the outer tank of a double-wall tank shall be located adjacent to the nameplate or the inner tank and shall refer to the outer tank.
The company has five major departments: steel plate production department (including quality inspection team), sales department, market development department, after-sales and logistics department, and finance department. The backbone of steel business from all over the country, with the chairman as the core, integrates self-confidence, independence, passion and responsibility, and strives for excellence! All people share the same belief: "Being a refined steel product line rewards customers, strengthen the steel industry, and realize the corporate dream!
Our company's logistics breaks through the perspective that the center of transportation service is ability, and emphasizes that the purpose of transportation service is customer first. Customer demand determines the content and mode of transportation service, while production is often small batch, diversified and consumer demand tends to be diversified. In the case of personalization, our logistics service also provides personalized service projects.
