40ft diameter API 650 flat-bottom tanks

While GB50341 generally takes the weld coefficient as 0.9;When the minimum yield strength of API 650 flat-bottom tanks steel plate is greater than 390 MPa, take 0.85. The thickness of API 650 tanks is generally smaller than that of GB50341, and this difference is particularly evident in the design of large tanks, where the overall weight of the tanks varies greatly.

The company's after-sales service tenet is "customer first, timely guarantee, enthusiastic service and effective work". In order to establish a set of perfect after-sales service system and strict management system, so that the after-sales service can be effectively guaranteed. The company has set up after-sales service department to ensure timely, unique and effective response to every user's request, coordinate internal resources internally, and put an end to all evasion and delay.

Uplift on Foundation
For API Standard 620 tanks with an internal design pressure less than 1 lbf/in.2 gauge, the uplift shall be taken as the smaller of the maximum uplift values computed under the following conditions:
a)The internal design pressure times 1.5 plus the design wind load on the shell and roof.
b)The internal design pressure plus 0.25 lbf/in.2 gauge plus the design wind load on the shell and roof.

The hot weather in summer brings great security challenges to the vertical oil storage tanks, API 650 flat-bottom tanks standing outdoors. We must find some simple and effective methods to protect the API 650 flat-bottom tanks in order to make them safely spend the summer. As a API 650 flat-bottom tanks manufacturer, in order to reduce the direct sunlight rate of the vertical oil tank, reduce the temperature change of the oil tank, and reduce the evaporation loss of the oil tank, we usually adopt the measures of applying sunscreen paint and washing with warm water.